Whats happening at Torchcraft....

See whats happening at Torchcraft and what we've been working on.

Tractor Hat Rack

Xavier_metal_Tractor_hat_rack

Here is a simple tractor hat rack design that was cut from 3/16 plate, painted then hooks were added for hat or coat hanging. 

Caya Del Grullo

Cayo_Del_Grullo

This South Texas gate sign was cut from 1/8" steel to help keep weight on the gate down a bit. 

Silver Striker Ranch

Silver_Striker_Ranch1

Another Colorado sign that I did a while back but I'm just getting the picture posted.  It's cut from 3/16" steel plate and installed by the customer.

The Frugal Pilgrim

The_Frugal_Pilgram

A customer came to me with an idea for her brother.  He was 70 years old and had always wanted to do a 500 mile hike across Spain.  He made it, and she brought me a picture of him on the trail.  I was able to pull a silhouette of him from the pic and create this metal sign to last a life time. 

 

 

 

Scottish Thistle

Scottish_Thistle

36" tall Scottish Thistle was cut from 1/8" plate, sand blasted and powder coated in a texture black.  I've never seen one of these before this project but it sure is a beautiful creation.

Horton's Heaven Installed

Hortons_Heaven_Installed

"Hi Jerry, well we finally built our entry gate up to our heaven. The sign you had previously constructed so very well for us initially hung out by our roadway gate. But now it is moved closer to our home at the foot of our advent up to our cabin. Again, thanks so very much. The sign is still like new and will have many looks from our visitors. Great work!!  Take care my friend."

JNL Ranch - Frio River

JNL_Ranch

JNL Ranch is located on the Frio River just outside of Leakey, TX.  If you're ever looking for a beautiful place to relax with the family on the Frio River be sure to look them up. 

This ranch gate entrance sign was cut from 1/8" steel and mounted to their gate.

 

https://www.JNLRanch.com/

Sure Shot Ranch - Colorado

Sure_Shot_Ranch2

This photo is an update from a previous post back in May, 2017.  A customer in Colorado had me make the overhead entrance sign for is Ranch. He recently asked me to design and cut the artwork to be added to his gates.  It looks like the project is about finished up and it looks absolutely beautiful.

See previous post here and read about how this ranch was named "Sure Shot Ranch".

Townsend Hillsboro Farm - Virgina

Townsend_Hillsboro_Farm

Here is a great looking sign for a farm in Virgina. 36 inch diameter circle, cut from 3/16" plate with a chain link welded on to each side to hang the sign from.    

Thompson Hunting Lodge

Thompson_hunting_lodge

Thompson Hunting Lodge sign, cut from 3/16 plate steel. Still hot from the torch. 

See the installed photo here.

Thompson Hunting Lodge Installed

Thompson_hunting_lodge1

Previously I posted a pic of the Thompson Hunting Lodge sign that was freshly cut.  They sent me a pic of the installed sign and I'm thrilled about how nicely their entrance looks.

See the previous post here.

Rockin Armadillo

Rocking_Armadillo

Rockin Armadillo ranch sign was cut from 3/16" plate steel, finished in black paint and installed on a South Texas Ranch. 

Jesusa Rose

Jesusa_Rose

Jesusa Rose with a hungry humming bird.  Freshly cut from 3/16" inch plate steel, ready for finish work.

Richter Ranch Sign

Richter

I think I made this sign over 20 years ago.  My customer brought it back to me recently and asked if I could clean it up with a fresh paint job.  What I like to call a "liquid overhaul". 

J & C Ranch

J__C_Ranch

J & C Ranch

NC Ranch Sign

NC_Ranch

Nice classic design for the NC Ranch.  Cut from 3/16" plate steel. 

Redneck Riviera

Redneck_Riveria

The Redneck Riviera (Cast and Stay) is a great place to stay when your looking to unwind along the Baffin Bay.  Great accomodations and access to a 300 foot lighted pier is just outside the back door.  Boat ramp is just around the corner.

Cast and Stay lodge in Riviera, TX 

This sign was cut from 3/16" plate and painted in a bold red to stand out against the weather wood overlooking the bay.

Hawk Creek Farm

Hawk_Creek_Farm_Metal_Art_Gate

Hawk Creek Farm is located in the Houston Area.  The gate frame was constructed with 2 inch square tubing, backed with cattle panel and the metal art is cut from 3/16" plate steel.

Mcbroom Farms - Medina TN

McBroom_Farms

Mcbroom Farms ordered this metal sign cut from 3/16" plate.  Mounting holes have been drilled, it just needs a few coats of piant and to be shipped off.. I hope to get a picture from the owners once its been installed.

Continue reading

Riverwood Entrance

Riverwood_Entrance

Riverwood Entrance sign was cut from 3/16" and powder coated with a dark bronze. 

NOTICE: ALL IMAGES, AND METAL ARTWORK ARE PROTECTED. REPRODUCTION OR MODIFICATION OF TORCHCRAFT ART IS STRICTLY PROTECTED BY COPYRIGHT LAW. 110294 Ih 37, Pleasanton, TX 78064 Contact Torchcraft For Store Hours Torchcraft is a Registered Trademark. Torchcraft does not have Metal Art Catalogs, Brochures or Templates to offer.fer.