Whats happening at Torchcraft....

See whats happening at Torchcraft and what we've been working on.

End table with mesquite top and metal art

End table with mesquite top and metal art

Over the years I have accumulated several good friends that started out as customers.  This is an end table that a good friend/customer from Rock Port put together with mesquite wood for the top.  Beautiful work.  Whitetail deer and quail are featured on this one. 

Chama New Mexico ranch gate insert

Chama New Mexico ranch gate insert

Previously posted is the insert to the other half of the gate being built for the hunting ranch.  This is the same size of just under 8 feet wide and cut from 1/8" plate steel.  The entire piece is cut from one sheet of steel.  It will be taken to Chama, welded into the gate and painted. 

Chama New Mexico ranch gate insert

Chama New Mexico ranch gate insert

A large gate is being built for the hunting ranch in Chama New Mexico.  This scene will be an insert on half of the gate.  Across the top of the gate will be an eagle, trout, mountain lion and turkeys.  The bottom of the gate has two large windows.  The sign shown here is a little less than 8 feet wide and cut out of 1/8" plate steel.  The trees and mountain scene is a general copy of art that the ranch owner already owns and is hanging in the lodge.  The other side of the gate is the same scene reversed and has an elk bull with two cows. 

New Wine Church

New Wine Church

New Wine Church near Poteet, Texas.  Beautiful new building with a nice cross on the front and an arched entrance with their name across the top. 

 

Elizita Ranch in South Texas

Elizita Ranch in South Texas

Ranch in South Texas is remodeling their entrance.   I was asked to cut the name and quail.  I am glad to see quail in the picture as quail are getting hard to find in South Texas.  Cut from 3/16" plate, primed and painted.

Chama New Mexico gate insert 2

Chama New Mexico gate insert 2

This is the second insert made for the Chama New Mexico gate.  The first insert features an elk bull and two cows.  This insert features mule deer buck with doe and two more mule deer bucks.  The basic design is copied from a wall hanging that the customer has in his lodge.

Chama New Mexico gate insert

Chama New Mexico gate insert

The gate that this insert goes on is is a very large gate.  Each side will have an insert and critters across the top.  This insert is about 41" tall by 91" wide.  Cut from 11 gauge (1/8") plate for the weight consideration.  Each insert weighs about 50 lbs.  Gate will be located on a 6,000 acre ranch in Chama New Mexico.

LIVING A DREAM ranch

LIVING A DREAM ranch

Order came from Virgina.  Couple sent a picture of themselves which became the center piece of the overhead sign.  The sign was sent to two pieces to minimize freight.  It looks really nice the way it is installed.   I hope that dream continues for a long time. 

77 KRUSE CREEK ROAD address sign

77 KRUSE CREEK ROAD address sign

Customer in Wyoming ordered a sign that needed to be 24" by 24".  This is hard to see in the photo but it is painted brown and made from 3/16" plate steel with holes drilled in all four corners. 

 

Sign going to Puerto Rico (Rich Port)

Sign going to Puerto Rico (Rich Port)

Had to look it up but Finca is farm or property.  This particular sign goes to a coffee plantation in Puerto Rico.  It displays "the farm of Pagan".  Mountains and prize roosters raised on this farm set the design.  To be mounted on the entrance gate and hand carried on an airline to it's destination.  Again, the thickness of the metal is 3/16" and will be painted black. 

KNC Ranch Entrance Gate Sign

KNC Ranch Entrance Gate Sign

Years fly by.  This ranch entrance was prepared for an old friend's son who was very young when I first met him.  Grew up and now has a place of his own.  This is his design and I was please to make it for him.  Cut from 3/16" plate steel.  Primed and painted.  The three pieces are welded in place with welding tabs to keep the lettering up and off the main pipe.  Really looks good to me.  

Barn scene of praying cowboy with lighting installed

Barn scene of praying cowboy with lighting installed

Previous posting showed the barn scene during daylight hours.  This picture shows how it "pops" when night lights are mounted.  Very nice display. 

Barn scene - Barn Scene

Barn scene - Barn Scene

Barn with scene mounted on outside wall.  Cut from 1/8" plate steel, primed and painted black.  This scene was mounted so that lights are mounted to highlight each piece.  Next posting will show that display.  

 

California Ranch Sign

California Ranch Sign

The best part of this sign job was who I did it for.  The man is Fred Vellutini, a World War II veteran who could pass for a 50 year old.  As I only talked to him on the phone, I was really surprised to learn his age.  He owns property in Northern California and we had a really good conversation during the ordering of the ranch sign.  He had to satisfiy all of the members of his family and this is what he came up with.  The best part of the conversaion was when he told me that he was out having dinner while wearing his WW II hat.  Some man walked by and asked him if that hat belonged to his dad.  Fred said "no sir, my dad was in World War I.....he had his own hat!"   Too cool.  Super nice and I hope he gets to enjoy that ranch for many years to come.

Custom Card Holder

Custom Card Holder

Cardholder was custom made according to the customer's directioin.  State of Texas cut from 1/8" plate steel and tempered finish added.  The name is placed on top of the state and welded in place.  The card holder is mounted on a large horseshoe.  Horseshoe nails are welded on the sides of the card holder to keep the cards in place.  The entire piece is clear coated. 

Wedding gift

Wedding gift

Received order from a custom for a ranch sign to be given for a wedding gift.  Horseshoes were used for hangers.  Sign cut from 3/1`6" plate.  Primed and painted black.

Realtor orders gift for customer

Realtor orders gift for customer

Realtor wanted to give their client a gift for the new property that they bought.  The couples initals are cut in each star.  The entire piece is cut from 3/16" plate.  Drilled for wall mounting. 

Race car medal holder

Race car medal holder

Race car driver who's nickname must be Rhino, wanted a display for his medals.  The piece has the rhino on top with three steel rings to hold rods.  The medals which have ribbons tied to them, are hung from the rods. 

Risner Boys Family Cutout

Risner Boys Family Cutout

A recent request from a customer who wanted his 5 sons silhouette's cut out for a family sign that he was giving to his wife for her birthday..  The picture supplied by the customer was perfect for silhouettes and turned out very good.  Cut from 3/16" plate.  Primed with automotive etching primer and top coated with industrial black enamel.  Finished product photo was taken in my shop.  

Continue reading

Script lettering

Script lettering

Cut from 3/16" plate and top side is ground to a shinny finish.  The photo shows the lettering in scattered fashion on a table top, in order to take the photo.    The customer will weld pins on the back side for mounting and clear coat the metal to maintain the silver shine. 

NOTICE: ALL IMAGES, AND METAL ARTWORK ARE PROTECTED. REPRODUCTION OR MODIFICATION OF TORCHCRAFT ART IS STRICTLY PROTECTED BY COPYRIGHT LAW. 110294 Ih 37, Pleasanton, TX 78064 Contact Torchcraft For Store Hours Torchcraft is a Registered Trademark. Torchcraft does not have Metal Art Catalogs, Brochures or Templates to offer.fer.