Whats happening at Torchcraft....

See whats happening at Torchcraft and what we've been working on.

One of a kind Chuck Wagon Kitchen - Currently For Sale

Chuckwagon Kitchen






Using rare vintage wheels and axle, this chuck wagon was completed with Prime Clear Select Pine, Red Oak and Marble tile, Redwood Cedar and Stainless Steel. Created by Torchcraft Metal Art in Pleasanton, Texas.ONE OF A KIND. Will be sold with Custom Metal Signs on Chuck-box to designate Name, Ranch Name, Brand, Logo etc.Currently for sale - $7500Perfect for Outdoor Kitchen or Showroom.Delivery available Add Custom Logo / Brand We can add your brand or logo or any design that you would like to the storage box.  "Bar & Grill" is just a demo.  Horse leg style support  Thic...

Continue reading

Ross Guide Services - Sam Rayburn Lake

Ross_Fishing_Guide_edited

If you're ever in the South Eastern portion of Texas and need to catch some fish, contact our friends at Ross Guide Services who specialize in in fishing Lake Sam Rayburn.    Ross Guide ServicesThis sign is big, It measures 8 feet wide by 40" tall.  Cut from a heavy duty 3/16" thick metal to survive the high coastal winds in the area.  Sand blasted, primer and top coated with a long lasting powder coat finish. 

Seeds Of Hope Garden Sign

Seeds_of_Hope_Garden_Sign

This garden sign was cut from 1/8" thick steel and features a 14 ga backer plate.     Sleeves for ground rods were welded to the sides for an easy, clean install using 3/4" ground rods.  

We also do Vinyl Lettering

Calvary_Chapel_KC-1 Vinyl Lettering on steel sign

 Don't let the word "Vinyl" scare you off.  We use a High Performance outdoor vinyl that has been known to outlast paint and powder coating in the harshest elements.  For a nice sleek and professional look, vinyl is a great way to go.  This sign is constructed of 14 gauge steel, with brackets welded to the backside to accept concrete anchors what were installed into the brick.  


TX Parks & Wildlife Department Region V

Texas_Parks_Wildlife_Conservation_Center1

How many government workers does it take to install a sign?  No comment.... But these guys did a great job installing this sign.   It's a bit more complicated than it appears.   Before ordering, they used a stud finder to locate the studs, then sent measurements.   We placed screw holes at each location, not only to hit each stud, but to center it on the wall.  We included a detailed design with measurements so they could hit each stud to keep this secured to the wall. 

Beautiful Powder Coat Finish

Ranchita_Mariquita_scarlet_river

This is a lightly textured finish powder coat with hints of a deep red and black.    While most people want a basic black finish, there is an almost unlimited amount of colors to choose from.  

Powder Coated Rust Color

Triple_O_Ranch_metal_sign3

We have a lot of people ask about rusty signs.   Cor-ten metal is the best route to take for a long lasting sign that develops a rusty patina but will never rust all the way through.  Its an expensive option but its the best option.  A more practical option is regular mild steel sign with a Rusty powder coated finish.  You get the durability of a quality powder coat finish and the look of a rusty patina sign without breaking the bank. 

Sweet Magnolia Pet Resort

Sweet_magnolias_pet_resort_metal_sign

This sign for Sweet Magnolia Pet Resort was cut from 1/8" thick steel, sand blasted, and powder coated in silver so that it contrasts from the wooden backer board.   1/4" holes were provided for wood screw mounting.   

White Wing Cantina Fireplace Sign

White_Wing_Cantina

A nice design for the White Wing Cantina fireplace.   This sign is cut from 1/8" thick steel and has a 16 gauge white backer plate which really helps the sign stand out when the background is busy or blends with the black sign.   

Mister T Shirt Logo

Mister_T_Shirt

Our customer wanted a smaller sized sign to place next to the entry door on their shop.  We used their logo to create this 24" sign cut from 1/8" steel.   Finished by sandblasting and powder coating in black.   

1/4" thick Family Logo / Brand Hanging Metal Sign

Boyle_Logo1_4 Family Logo / Brand Hanging Metal Sign

This family logo is 36" x 36" and cut from a heavy 1/4" thick steel.  The connection between the "B" and the circle is the weak point in the design so we elected to use a thicker than normal steel for provide a more rigid design.  Note, normally 3/16" thick steel is used. 

Custom Brackets

Arched_Brackets

This customer needed some curved brackets to fit a 9.5" horizontal log that was across his entrance.  For this project, the sign, brackets and bolts were all blasted and powder coated to match.  Carriage bolts (not pictured) were used to provide a low profile connection between the sign and brackets. 

Southern Land

Southern_Land-1

Our customer needed some help finishing up his entrance.  All pieces were cut from 3/16" plate, blasted and powder coated.  The arrowheads connecting the top horizontal beam to the uprights was a nice touch.  They did a great job with this project.  I'm glad that we could help out with the metal work. 

Shenkir Ranch

Shenkir-1

This ranch sign was cut from 3/16" plate.  Our customer gets high winds in the area and didn't want the sign blowing around too much.  The heavy 3/16" plate helps a lot with that, plus we welded extra chainlinks to the bottom corners for 2 extra connection points. 

Flying B Ranch - Arizona

Flying B Ranch

As a couple of avaition enthousiast, we love doing work for other avaition pros / enthousiast.  The Flying B Ranch was cut from 3/16" steel and blasted / powder coated in traditional black.
 

Zerlotti - Horse Genetics

Zerlotti Zerlotti

Zerlotti - Horse Genetics - wanted to add their name and logo to their existing gate and entrance.  The large "Z's" were cut from 1/8" to keep weight down on the gate.   The lettering / logo was cut from 3/16 and installed in the stone.

Blessed Hope Ranch

Blessed Hope Ranch Blessed Hope Ranch

We do a lot of black powder coating on our signs but sometimes White is the way to go.   This sign really stands out. We do a lot of black powder coating on our signs but sometimes White is the way to go.   This sign really stands out!  Our customer provided the measurements for hole placement that aligned with the gate structure.

Corten Address Sign

Corten Address Sign Corten Address Sign

This customer wanted a bold address sign with a natural rust finish.  This was cut from 3/16" corten steel, also known as "weathering steel".   It was sandblasted which removes the millscale for a quick rust finish and will never rust though. Thats the beauty of corten steel. 

The Last Waltz - Pleasanton, TX

Last_Waltz

Here is a classic entrance that I created for a customer in the Pleasanton, TX area.  This was made many years ago but I just realize that it never made it onto my website. 

Durando Ranch, Labelle Florida

Durando_Ranch

The Durando Ranch is in the North Fort Myers Florida area.  Most of the signs we do end up with a black powder coat.  Every now and then we'll do a white powder coat and it always looks great and stands out well. It's always important to consider the background and try to envision how visible the sign will be against the contrasting background colors. 

NOTICE: ALL IMAGES, AND METAL ARTWORK ARE PROTECTED. REPRODUCTION OR MODIFICATION OF TORCHCRAFT ART IS STRICTLY PROTECTED BY COPYRIGHT LAW. Torchcraft 110294 IH 37 Pleasanton, TX 78064 Contact Torchcraft For Store Hours Torchcraft is a Registered Trademark. Torchcraft does not have Metal Art Catalogs, Brochures or Templates to offer.